In recent years, driven by the coal transformation into clean energy heating in the north, air energy heat pumps have become hot selling products. Because of its obvious effect of environmental protection and energy saving, high comfort, environmental pollution, won the government at all levels to vigorously develop the premise, but also won the majority of customers. Naturally, there are many customers often want to ask, which brand of air can save electricity? In fact, for residents in northern regions where the temperature is relatively low, it is best to choose to focus on frequency conversion air energy brand.

A turning tool is a tool that has a cutting portion for turning operations. Turning tools are one of the most widely used tools in machining. The working part of the turning tool is the part that generates and handles chips, including the cutting edge, the structure that breaks or rolls up the chips, the space for chip removal or storage, and the passage of cutting fluid.

Cermet blade is a composite material of ceramic and metal made by powder metallurgy method, which not only has the toughness, high thermal conductivity and good thermal stability of metal, but also has the characteristics of high temperature resistance, corrosion resistance and wear resistance of ceramic.

Full DC Inverter Technology MACON DC inverter heater stands out for its full DC inverter technology, DC compressor and DC fan motor. Dc inverter technology is adopted for rapid heating, and the heat output capacity of the unit is automatically adjusted according to the change of water temperature and working environment temperature, so as to keep the heat pump running in the most efficient state.

The automotive industry The processing characteristics of the automotive industry are, firstly, mass production and assembly line production, and secondly, the processing conditions are relatively fixed. In order to optimize production, improve quality and efficiency, the automotive industry puts forward very strict requirements on the machining efficiency and service life of tools. At the same time, due to the use of assembly line operations, in order to avoid the shutdown of the entire production line due to tool change and cause huge economic losses, a mandatory unified tool change method is usually adopted. This also places uniquely high demands on the stability of the tool quality.

ceshi

The development of machine tools and cutting tools is complementary and promote each other

Full DC Inverter Technology MACON DC inverter heater stands out for its full DC inverter technology, DC compressor and DC fan motor. Dc inverter technology is adopted for rapid heating, and the heat output capacity of the unit is automatically adjusted according to the change of water temperature and working environment temperature, so as to keep the heat pump running in the most efficient state.

The development of machine tools and cutting tools is complementary and promote each other

Carbide deep hole drill inserts are an effective tool for deep hole drilling, which can process a wide range from mold steel, fiberglass, plastics such as Teflon to high-strength alloys such as P20 and Inconel ) deep hole machining. In deep hole processing with strict tolerance and surface roughness requirements, gun drilling can ensure the dimensional accuracy, positional accuracy and straightness of the hole.

China International Intelligent Industrial Automation and Power Transmission (Jinan) Exhibition. Booth :Hall 3,C512 21st China (Hangzhou) Machine Tool Mould and Metal Working Exhibition 2022 Booth:D013 2023 China (Fuzhou) Industry Expo., Booth:Q66 Welcome to our booth!

The so-called super hard material refers to artificial diamond and cubic boron nitride (abbreviated as CBN), as well as the polycry stalline diamond (abbreviated as PCD) and polycry stalline cubic nitride shed (abbreviated as PCBN) by sintering these powders and binders.

The reasonable geometry structure of the precision turning carbide machining insert can effectively control the contact length of the chip; the large rake angle design, the cutting edge is sharp, and the cutting is easier; the cutting edge arc accuracy is controlled within 0.02mm, excellent product processing Accuracy; special surface post-treatment process, the finished product has a higher finish; high-strength screw compression ensures the installation accuracy and repeatable positioning accuracy of the blade.

1.High hardness, good wear resistance, low speed to high speed can be processed, a wide range of applications.

The reasonable geometry structure of the precision turning carbide machining insert can effectively control the contact length of the chip; the large rake angle design, the cutting edge is sharp, and the cutting is easier; the cutting edge arc accuracy is controlled within 0.02mm, excellent product processing Accuracy; special surface post-treatment process, the finished product has a higher finish; high-strength screw compression ensures the installation accuracy and repeatable positioning accuracy of the blade.

Welcome to Xingyi Site for the High End Veneer Dryer

During the milling process, the milling cutter itself will be worn and dull while cutting chips. After the milling cutter is blunt to a certain extent, if it continues to be used, it will lead to a significant increase in the milling force and cutting temperature, and the wear amount of the milling cutter will also increase rapidly, thus affecting the machining accuracy and surface quality and the utilization rate of the milling cutter.