Home » Products » Equipment Air Filter » High Temperature Resistant HEPA Air Filter

Core Products

High Temperature Resistant HEPA Air Filter

Material:HEPA filter

Size: Available Upon Request

Color Customers\' Require

Package: Customized/Neutral

Filtration Efficiency: H13,H14

Sample: Avialable/Free

Place of Origin: CHINA
 
Availability:

250 high temperature resistant HEPA Air Filter applicable places and application fields:

6.

1. High cleanliness occasions such as aerospace, electronics, semiconductors, chips, biopharmaceuticals, hospitals, food processing, etc.
2. Terminal of air-conditioning ventilation system (end filtering and hot-air high-temperature oven, oven).
3. The operating room of the hospital, hospital, biopharmaceutical, laboratory, circuit board, microelectronics, optics, LED photoelectric, QS food processing or purification equipment requires a clean working environment with high temperature at the end.




High Temperature Resistant HEPA Air Filter
High temperature resistant HEPA Air Filter is assembled with glass fiber or ultra-fine glass fiber filter paper, aluminum foil plate, stainless steel frame, and special high temperature resistant sealant. Average Arrestance: H13-H14
 
The high temperature resistant HEPA Air Filter is assembled with glass fiber or ultra-fine glass fiber filter paper, aluminum foil plate, stainless steel frame, and special high temperature resistant sealant. The high temperature resistant HEPA Filter uses a partition design. The corrugated partition can accurately maintain the spacing of the pleats and maximize the use of the filter material with minimal resistance. 180 pleats on both sides of the filter material are folded to form a wedge-shaped pleated layer. When the filter material is bent, there are two indentations to make it open into a wedge-shaped box pleated layer at the end of the partition. The wedge-shaped box pleated layer can be Prevent damage to the filter material.





Process design features of 250℃ high temperature resistant HEPA Air Filter:
1. The unique frame design of the 1.5-2.00mm stainless steel frame increases the overall strength.
2. The arc corrugated peaks of the 0.03mm aluminum foil partition can not only protect the filter paper from damage, but also reduce the resistance and wind speed to pass evenly.
3. The spacing of high-quality glass fiber filter paper is 4mm, which increases the filtering area, large dust holding capacity, low resistance and high filtering efficiency.
4. The one-component adhesive is used for a long time at a high temperature of 260 degrees, and the temperature-resistant sealing strip prevents leakage. 5. Glass fiber filter material, high temperature resistant special rubber gasket.
6. The 250-260 degree high temperature resistant high efficiency air filter is used for the instantaneous maximum temperature up to 300 degrees, and the constant temperature can reach about 260 degrees, with stable and reliable performance.


Product features of 250℃ high temperature resistant HEPA Air Filter:
1. Select high-quality filter materials, and the filtration efficiency can reach F9-H14.
2. Ensure that the high efficiency level can reach 99.99%@0.3um under the rated air volume.
3. It can be used in a high temperature environment of 300℃.
4. With the least resistance, make the most of the filter material.
5. Provide a variety of frame materials and thickness requirements.







250℃ high temperature resistant HEPA Air Filter materials and operating conditions:
Filter material: ultra-fine glass fiber filter paper
Sealant: Red silica gel (250~280℃) Ceramic glue (350~400℃)
Frame material: Aluminum profile/aluminum plate/galvanized iron/stainless steel can be selected below 250℃, galvanized iron frame or stainless steel frame must be used above 250℃
Separator: 0.035mm thick aluminum foil
Sealing strip: Silicone board (250~280℃), PTFE strip (350~400℃)
Filtration efficiency: 99.97%~99.995% @ 0.3μm
Maximum use temperature: 250~280℃ 350~400℃
Use the highest humidity: 80%


Technical parameters of 250℃ high temperature resistant HEPA Air Filter:
 

(WxHxT)

Rated Airflow(m3/h )

Initial Pressure Drop(Pa)

Final Pressure Drop(Pa)

Filter Area(m2)

Dust Holding Capacity
  (g/m2)

Average Arrestance

484x484x120

390

≤200

400-600

4.4

230

H13-H14

610x610x120

620

≤200

400-600

7.1

370

H13-H14

915x610x120

930

≤200

400-600

10.6

560

H13-H14

1220x610x120

1500

≤200

400-600

14.1

740

H13-H14

484x484x150

530

≤200

400-600

6.0

320

H13-H14

610x610x150

1000

≤200

400-600

9.7

510

H13-H14

915x610x150

1500

≤200

400-600

14.5

770

H13-H14

1220x610x150

2000

≤200

400-600

19.3

1020

H13-H14

484x484x220

1000

≤200

400-600

9.8

600

H13-H14

610x610x220

1600

≤200

400-600

15.8

920

H13-H14

915x610x220

2300

≤200

400-600

23.7

1340

H13-H14

1220x610x220

3000

≤200

400-600

31.6

1750

H13-H14


Note: Special Size Available Upon Request.


Previous: 
Next: