English 
ENHANCING PERFORMANCE IN CABIN AIR PARTICLE FILTERS
| + Flame retardant | + Easy Bonding | + Improved dust holding capacity |
| + Protective pre-filter | + Easy to pleat | + Improved filtration efficiency |
JIATEC Nonwoven filter material for cabin air filters supports your high-performance melt-blown layer, improves filtration efficiency and dust-holding
Capacity in particle filters for car interiors and pollen filters and is easy to process with knife or rotary pleating.
Presistent anti-virus function,effectively inhibiting the spread of the virus particles in the aie indoors.
Features & advantages
Creating sharp and stable pleats
High rigidity, stiffness and dimensional stability
Offering equivalent physical properties and low basis weight than dry-laid process
Various range of products available (30~120g/㎡)
Complying with RoHS
1）Single layer filter
Our product could be directly pleated as the Pre-filter layer of HEPA Purifier Filter.The prefilter layer protects the actual fine filter layer from rapid clogging,reduces pressure drop and increases the filter lifetime.
2）Composite filter material
Because melt-blown is very soft and lower stiffness, couldn't be directly pleated. So our product could be composited with melt-blown(MB), as the support layer of composite filter media(MB+PET), which have the characteristics of low wind resistance, high stiffness, eco-friendly, PM2.5 filter rate reaches 99.5%-99.99%.
3）Multi-layer composite filter material
|
Customized Color
|
Customized Width 0.8-2.7M
|
Customized Function
|
Customized Weight 30-120GSM
Baoji Jiaxin Filter Materials Tech Co., Ltd., established in 2006, is a professional manufacturer of substrate wet-laid nonwoven fabrics in China. Based on comprehension and research to various fibers and long-term technology experience, a set of production equipment and related production technology have been developed. High-specification, high-quality and high-performance products could be produced in batches after years of exploration. We possess ISO 14001 and ISO 9001 Certification, RoHS and Reach Test Report, and have ten patents, won the China Technology Association Golden Bridge Award in 2018.
We produce from 30 to 120g/m² wet-laid nonwoven, mixed fiber nonwoven and function non-woven fabrics; three professional production lines, product width 1300 to 2700mm, annual production capacity is 60 million m². Our company has 58 college degree and 16 professional technical personnel, possess the capabilities of product development, technical testing and product warrant tracking.
Our products are mainly as the support layer of air filter, liquid filter and composite filter materials. It is an ideal composite support material for HEPA air filter, suitable for household and cabin air filter, central air conditioner, HVAC system and large-scale indoor cleaning and other industrial, civil and construction fields etc.
ENHANCING PERFORMANCE IN CABIN AIR PARTICLE FILTERS
| + Flame retardant | + Easy Bonding | + Improved dust holding capacity |
| + Protective pre-filter | + Easy to pleat | + Improved filtration efficiency |
JIATEC Nonwoven filter material for cabin air filters supports your high-performance melt-blown layer, improves filtration efficiency and dust-holding
Capacity in particle filters for car interiors and pollen filters and is easy to process with knife or rotary pleating.
Presistent anti-virus function,effectively inhibiting the spread of the virus particles in the aie indoors.
Features & advantages
Creating sharp and stable pleats
High rigidity, stiffness and dimensional stability
Offering equivalent physical properties and low basis weight than dry-laid process
Various range of products available (30~120g/㎡)
Complying with RoHS
1）Single layer filter
Our product could be directly pleated as the Pre-filter layer of HEPA Purifier Filter.The prefilter layer protects the actual fine filter layer from rapid clogging,reduces pressure drop and increases the filter lifetime.
2）Composite filter material
Because melt-blown is very soft and lower stiffness, couldn't be directly pleated. So our product could be composited with melt-blown(MB), as the support layer of composite filter media(MB+PET), which have the characteristics of low wind resistance, high stiffness, eco-friendly, PM2.5 filter rate reaches 99.5%-99.99%.
3）Multi-layer composite filter material
|
Customized Color
|
Customized Width 0.8-2.7M
|
Customized Function
|
Customized Weight 30-120GSM
Baoji Jiaxin Filter Materials Tech Co., Ltd., established in 2006, is a professional manufacturer of substrate wet-laid nonwoven fabrics in China. Based on comprehension and research to various fibers and long-term technology experience, a set of production equipment and related production technology have been developed. High-specification, high-quality and high-performance products could be produced in batches after years of exploration. We possess ISO 14001 and ISO 9001 Certification, RoHS and Reach Test Report, and have ten patents, won the China Technology Association Golden Bridge Award in 2018.
We produce from 30 to 120g/m² wet-laid nonwoven, mixed fiber nonwoven and function non-woven fabrics; three professional production lines, product width 1300 to 2700mm, annual production capacity is 60 million m². Our company has 58 college degree and 16 professional technical personnel, possess the capabilities of product development, technical testing and product warrant tracking.
Our products are mainly as the support layer of air filter, liquid filter and composite filter materials. It is an ideal composite support material for HEPA air filter, suitable for household and cabin air filter, central air conditioner, HVAC system and large-scale indoor cleaning and other industrial, civil and construction fields etc.
