English 
| Material: | |
|---|---|
WHAT MAKES JIATEC AN EXCELENT CARRIER FOR FILTERS?
The Jiatec product range offers a variety of high-performance Polyester Wet-laid filter fabrics. They maximize the efficiency and durability of indoor, cabin, HVAC and industrial air filters. Manufacturers who use Jiatec air filter carriers are taking particular advantage of the nonwoven’s unique set of properties: Superior air permeability combined with excellent stability and stiffness.
Functions
1, Carbon cloth has an excellent carbon blocking effect
2, Can eliminate pollen, dust, allergens, bacterial spores and other substances in the air
3, Adsorb air benzene, sulfur dioxide and other substances that are harmful to the body
4, Carbon composite cloth has the effect of preventing mildew and sterilization, which can be effective eliminates various bacteria such as pneumococcus in the air
5, Avoiding secondary pollution of air conditioners
6, Directly pleated in a single layer for pre-filter.
The Comparison of the conventional series with added-density | ||
Item | J70GSM(conventional series) | JA70GSM(Added-density) |
Gram (g/m2) | 70±7g/m² | 70±7g/m² |
Thickness (mm) | 0.52±0.1mm | 0.42±0.06 |
Tensile Strength MD | ≥80N/50mm | ≥80N/50mm |
Tensile Strength CD | ≥70N/50mm | ≥70N/50mm |
Stiffness MD（Geerlai） | ≥220mg | ≥280mg |
Stiffness CD（Geerlai） | ≥140mg | ≥230mg |
Breathing(mm/s)200Pa/cm2 | ≥3600 | ≥3000 |
Compare with the J conventional series，Under the same gram weight, the thickness of the JA series is smaller, the density and stiffness is high. The single layer filtration efficiency can reach G4. When used as a filter cloth for activated carbon filter, it can effectively prevent the leakage of activated carbon particles.
Features
1, Activated carbon was dipped into every paper, high carbon content.
2, Good stiffness and ultra-low wind resistance, suitable for composite substrates of various filter materials
3, Filtration efficiency can reach G4
4, The dust holding capacity is high.
1）Single layer filter
Our product could be directly pleated as the Pre-filter layer of HEPA Purifier Filter.The prefilter layer protects the actual fine filter layer from rapid clogging,reduces pressure drop and increases the filter lifetime.
2）Composite filter material
Because melt-blown is very soft and lower stiffness, couldn't be directly pleated. So our product could be composited with melt-blown(MB), as the support layer of composite filter media(MB+PET), which have the characteristics of low wind resistance, high stiffness, eco-friendly, PM2.5 filter rate reaches 99.5%-99.99%.
3）Multi-layer composite filter material
|
Customized Color
|
Customized Width 0.8-2.7M
|
Customized Function
|
Customized Weight 30-120GSM
Baoji Jiaxin Filter Materials Tech Co., Ltd., established in 2006, is a professional manufacturer of substrate wet-laid nonwoven fabrics in China. Based on comprehension and research to various fibers and long-term technology experience, a set of production equipment and related production technology have been developed. High-specification, high-quality and high-performance products could be produced in batches after years of exploration. We possess ISO 14001 and ISO 9001 Certification, RoHS and Reach Test Report, and have ten patents, won the China Technology Association Golden Bridge Award in 2018.
We produce from 30 to 120g/m² wet-laid nonwoven, mixed fiber nonwoven and function non-woven fabrics; three professional production lines, product width 1300 to 2700mm, annual production capacity is 60 million m². Our company has 58 college degree and 16 professional technical personnel, possess the capabilities of product development, technical testing and product warrant tracking.
Our products are mainly as the support layer of air filter, liquid filter and composite filter materials. It is an ideal composite support material for HEPA air filter, suitable for household and cabin air filter, central air conditioner, HVAC system and large-scale indoor cleaning and other industrial, civil and construction fields etc.
WHAT MAKES JIATEC AN EXCELENT CARRIER FOR FILTERS?
The Jiatec product range offers a variety of high-performance Polyester Wet-laid filter fabrics. They maximize the efficiency and durability of indoor, cabin, HVAC and industrial air filters. Manufacturers who use Jiatec air filter carriers are taking particular advantage of the nonwoven’s unique set of properties: Superior air permeability combined with excellent stability and stiffness.
Functions
1, Carbon cloth has an excellent carbon blocking effect
2, Can eliminate pollen, dust, allergens, bacterial spores and other substances in the air
3, Adsorb air benzene, sulfur dioxide and other substances that are harmful to the body
4, Carbon composite cloth has the effect of preventing mildew and sterilization, which can be effective eliminates various bacteria such as pneumococcus in the air
5, Avoiding secondary pollution of air conditioners
6, Directly pleated in a single layer for pre-filter.
The Comparison of the conventional series with added-density | ||
Item | J70GSM(conventional series) | JA70GSM(Added-density) |
Gram (g/m2) | 70±7g/m² | 70±7g/m² |
Thickness (mm) | 0.52±0.1mm | 0.42±0.06 |
Tensile Strength MD | ≥80N/50mm | ≥80N/50mm |
Tensile Strength CD | ≥70N/50mm | ≥70N/50mm |
Stiffness MD（Geerlai） | ≥220mg | ≥280mg |
Stiffness CD（Geerlai） | ≥140mg | ≥230mg |
Breathing(mm/s)200Pa/cm2 | ≥3600 | ≥3000 |
Compare with the J conventional series，Under the same gram weight, the thickness of the JA series is smaller, the density and stiffness is high. The single layer filtration efficiency can reach G4. When used as a filter cloth for activated carbon filter, it can effectively prevent the leakage of activated carbon particles.
Features
1, Activated carbon was dipped into every paper, high carbon content.
2, Good stiffness and ultra-low wind resistance, suitable for composite substrates of various filter materials
3, Filtration efficiency can reach G4
4, The dust holding capacity is high.
1）Single layer filter
Our product could be directly pleated as the Pre-filter layer of HEPA Purifier Filter.The prefilter layer protects the actual fine filter layer from rapid clogging,reduces pressure drop and increases the filter lifetime.
2）Composite filter material
Because melt-blown is very soft and lower stiffness, couldn't be directly pleated. So our product could be composited with melt-blown(MB), as the support layer of composite filter media(MB+PET), which have the characteristics of low wind resistance, high stiffness, eco-friendly, PM2.5 filter rate reaches 99.5%-99.99%.
3）Multi-layer composite filter material
|
Customized Color
|
Customized Width 0.8-2.7M
|
Customized Function
|
Customized Weight 30-120GSM
Baoji Jiaxin Filter Materials Tech Co., Ltd., established in 2006, is a professional manufacturer of substrate wet-laid nonwoven fabrics in China. Based on comprehension and research to various fibers and long-term technology experience, a set of production equipment and related production technology have been developed. High-specification, high-quality and high-performance products could be produced in batches after years of exploration. We possess ISO 14001 and ISO 9001 Certification, RoHS and Reach Test Report, and have ten patents, won the China Technology Association Golden Bridge Award in 2018.
We produce from 30 to 120g/m² wet-laid nonwoven, mixed fiber nonwoven and function non-woven fabrics; three professional production lines, product width 1300 to 2700mm, annual production capacity is 60 million m². Our company has 58 college degree and 16 professional technical personnel, possess the capabilities of product development, technical testing and product warrant tracking.
Our products are mainly as the support layer of air filter, liquid filter and composite filter materials. It is an ideal composite support material for HEPA air filter, suitable for household and cabin air filter, central air conditioner, HVAC system and large-scale indoor cleaning and other industrial, civil and construction fields etc.
